Process Study on 3D Printing of Polymethyl Methacrylate Microfluidic Chips for Chemical Engineering

Microfluidic technology is an emerging interdisciplinary field that uses micropipes to handle or manipulate tiny fluids in chemistry, fluid physics, and biomedical engineering. As one of the rapid prototyping methods, the three-dimensional (3D) printing technique, which is rapid and cost-effective and has integrated molding characteristics, has become an important manufacturing technology for microfluidic chips. Polymethyl-methacrylate (PMMA), as an exceptional thermoplastic material, has found widespread application in the field of microfluidics. This paper presents a comprehensive process study on the fabrication of fused deposition modeling (FDM) 3D-printed PMMA microfluidic chips (chips), encompassing finite element numerical analysis studies, orthogonal process parameter optimization experiments, and the application of 3D-printed integrated microfluidic reactors in the reaction between copper ions and ammonium hydroxide. In this work, a thermal stress finite element model shows that the printing platform temperature was a significant printing parameter to prevent warping and delamination in the 3D printing process. A single printing molding technique is employed to fabricate microfluidic chips with square cross-sectional dimensions reduced to 200 μm, and the microchannels exhibited no clogging or leakage. The orthogonal experimental method of 3D-printed PMMA microchannels was carried out, and the optimized printing parameter resulted in a reduction in the microchannel profile to Ra 1.077 μm. Finally, a set of chemical reaction experiments of copper ions and ammonium hydroxide are performed in a 3D-printed microreactor. Furthermore, a color data graph of copper hydroxide is obtained. This study provides a cheap and high-quality research method for future research in water quality detection and chemical engineering.