Remote-Sensing-Based Estimation of Rooftop Photovoltaic Power Production Using Physical Conversion Models and Weather Data

The global photovoltaic (PV) installed capacity, vital for the electric sector’s decarbonation, reached 1552.3 GWp in 2023. In France, the capacity stood at 19.9 GWp in April 2024. The growth of the PV installed capacity over a year was nearly 32% worldwide and 15.7% in France. However, integrating PV electricity into grids is hindered by poor knowledge of rooftop PV systems, constituting 20% of France’s installed capacity, and the lack of measurements of the production stemming from these systems. This problem of lack of measurements of the rooftop PV power production is referred to as the lack of observability. Using ground-truth measurements of individual PV systems, available at an unprecedented temporal and spatial scale, we show that by estimating the PV power production of an individual rooftop system by combining solar irradiance and temperature data, the characteristics of the PV system inferred from remote sensing methods and an irradiation-to-electric power conversion model provides accurate estimations of the PV power production. We report an average estimation error (measured with the pRMSE) of 10% relative to the system size. Our study shows that we can improve rooftop PV observability, and thus its integration into the electric grid, using little information on these systems, a simple model of the PV system, and weather data. More broadly, this study shows that limited information is sufficient to derive a reasonably good estimation of the PV power production of small-scale systems.