SHIELD System: Seismic Inertia Deactivated

Despite remarkable advances in base isolation, damping systems, and performance based seismic design, conventional earthquake engineering remains reactive by nature. It addresses inertial forces only after they are generated, accepting deformation and energy absorption as inevitable consequences. Such an approach fundamentally limits resilience, especially in high-intensity or near field events where acceleration exceeds the elastic absorption capacity of materials. Classical earthquake engineering is based on two fundamental principles:(a) seismic forces F = m⋅a are addressed after they occur, through elastic or plastic deformation, and(b) the seismic behavior of structures is scaled according to the laws of dynamic similarity. This work presents experimental and numerical evidence that invalidates the necessity of both assumptions. The SHIELD system is introduced — a pre-active seismic protection technology that shifts the objective of structural design from resistance to the prevention and elimination of seismic force generation before it occurs. The system relies on prestressed tendons anchored to the subsoil and the roof. These tendons create a strong energy field that enforces complete kinematic coupling between the ground and the structure, eliminating time lag and preventing the transfer of seismic energy into the building. As a result, relative acceleration becomes negligible (a_rel ≈ 0), and seismic forces are effectively neutralized (F ≈ 0). Prestressing also acts as a pre-compression mechanism, eliminating micro-gaps and deformations in the concrete, tendons, and soil that contribute to hysteresis. Seismic excitation is transmitted instantaneously from the ground to the roof, effectively preventing relative motion and its destructive consequences. The system’s performance is maximized when applied to the edges of elongated shear walls with intersecting floor plans. In this configuration, the tendons generate a unified counteracting moment, proportional to the total wall width and the strength of the tendons and anchorages, preventing overturning, plasticization, and damage accumulation. If seismic loads exceed the prestressing force, the system reverts to conventional elastic behavior. The key experimental findings are:(1) Relative displacements below 0.1 mm under combined three-dimensional acceleration up to 22g,(2) No increase in tendon forces beyond the prestressing level, and(3) A stable energy equilibrium (index 1.000) across a PGA range of 0.2g to 22g. These consistent results — both in a 1:7 scale model and in full-scale simulation — establish the Theory of Non-Scaling Seismic Response (NSRT) and introduce a new physical paradigm in which earthquakes are treated as kinematic excitations rather than dynamic loads. Beyond the immediate structural implications, the results establish a cross disciplinary foundation linking structural dynamics, soil mechanics, and kinematic geophysics. By enforcing absolute motion identity between ground and superstructure, SHIELD transforms seismic excitation into a continuous kinetic field, eliminating discontinuities in displacement and energy transmission. This paradigm introduces a new category of preventive seismic engineering based on Geo Fusion, the mechanical unification of soil and structure into a single dynamic entit.