The effect of residual stress on the fracture toughness of Ti-6Al-4V produced by laser-based powder bed fusion
Listed in
This article is not in any list yet, why not save it to one of your lists.Abstract
Laser powder bed fusion (LPBF) imposes steep thermal gradients, resulting in distortion and the formation of significant residual stresses, which often precipitate in-situ cracking at support interfaces and sharp geometric features. To isolate their influence on structural integrity, we combined fracture mechanics testing with residual stress evaluation on as-built compact tension specimens printed in two orthogonal orientations. The experimentally measured apparent stress-intensity factor was deconvolved into mechanical and residual-stress components, yielding a residual-stress-free fracture toughness (\(\:{K}_{ICeff}\)). Apparent fracture toughness ranged from 25–35 MPa.m 1/2 , whereas \(\:{K}_{ICeff}\) increased to 45–52 MPa.m 1/2 . Residual stresses, therefore, depress the material’s residual-stress-free resistance by up to ~ 50% and accentuate orientation-dependent anisotropy. The framework presented offers a route for quantifying process-induced toughness degradation in LPBF alloys.