Production of Lubricant Grease From Waste Palm Fruit Bunch and Plantain Peel
Listed in
This article is not in any list yet, why not save it to one of your lists.Abstract
The indiscriminate disposal of agricultural waste is a major contributor to environmental pollution in today’s world. This study aims to mitigate this issue by synthesizing a bio-lubricant grease from agricultural wastes, specifically plantain peels and palm kernel bunches. The methodology involved the preparation of bio-alkaline solutions through the carbonization of these agricultural wastes. The carbonized materials were characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) analysis. The bio-alkaline solutions were employed in a saponification reaction with palm kernel oil, and the resulting soap was blended with shea butter oil and coconut oil to produce the bio-lubricant grease. SEM analysis revealed a rough, heterogeneous surface for carbonized plantain peels and a porous texture for carbonized palm kernel bunches. FTIR spectra identified characteristic absorption bands at 3145.9 cm⁻¹ and 3127 cm⁻¹ for plantain peels and palm kernel bunches, respectively. XRD data indicated a crystalline nature for carbonized plantain peels and an amorphous structure with embedded crystals for carbonized palm kernel bunches. The physicochemical properties of the synthesized bio-lubricant grease, such as oxidation stability at 80ºC (25–35 mins), thermal stability (up to 194°C), dropping point (143.8 ºC), viscosity of up to 6030.3 mPa/S for one of the samples were comparable to conventional grease. These results demonstrate the feasibility of converting agricultural waste into high-value bio-lubricants, offering a sustainable solution to waste management and environmental pollution.